10% DISCOUNT FOR BOX QUANTITES (15)
DISCLAIMER: Please note that the colours depicted on the following chart are for guidelines only due to Variances in computer graphics cards and/or monitors setup. For more accuracy view a hard copy RAL Colour Chart. We can't be held responsible for any mis-match as the accuracy of each computer screen our users view our website with will vary. To ensure optimal results, we recommend a compatibility test between the sealant and the surface.
Product:
Silirub 2 is a high-quality neutral, elastical one component joint sealant based on silicones.
Characteristics:
- Very easy application
- Permanent colour, UV-resistant
- Stays elastic after curing
- Available in a wide range of colours
- Very good adhesion on many materials
- Low modulus
Applications:
Building- and construction joints
Top sealing at glazing jobs
Sealing of polycarbonate and polyacrylate panels (consult our technical services)
Joints with high movement between different building materials
Sealing’s between treated wood and glass
Sealing’s between PVC and glass
Packaging: cartridge 310mL,
Shelf life:
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°.
Surfaces:
Type: all usual building surfaces
State of Surface: clean, dry, free of dust and grease
Preparation: apply Primer 150 for applications on porous surfaces – no primer required for non
Porous surfaces. Surface Activator should be used to enhance adhesion to non porous surfaces.
We recommend a preliminary compatibility test.
Joint Size:
Minimum Width: 5mm
Maximum Width: 30mm
Minimum Depth: 5mm
Recommendation: 2 x depth = width
Application:
Method: caulking gun
Application temperature: +1°C to +30°C
Clean: with white spirit immediately after use
Finish: with soapy water before skinning
Repair: with Silirub 2
Health- and Safety Recommendation:
Apply the usual industrial hygiene.
Remarks:
Chemically completely neutral (pH=7).
Technical Norms/Conforms with:
- Belgium: ATG 1808 (NIT 107)
- Rapport IANESCO 3812-label alimentaire for applications in food surroundings
- France: “Mastic Elastomère 1ère cat. Sans primaire sur verre, alu et béton (label SNJF)
- Germany: DIN 18540 Teil 2 – DIN 18545 Teil 2 Dichtstoffgruppe E
- United Kingdom: BS 5889 Type A
- USA: TTS 001543a Class A
Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith. Because of the diversity of the materials and substrates and the great number of possible applications which are out of our control, we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments.
DELIVERY COSTS & INFORMATION
SEALANT COVERAGE CHART
GENERAL INFORMATION
